Become a Supporting Member         Become a Preferred Vendor
Go Back   Ford Expedition Forum > Ford Expedition Forum > Electrical
Reload this Page power window problem

Sponsored Ads
Register to remove these ads.

Electrical

power window problem

This is a discussion on power window problem within the Electrical forums, part of the Ford Expedition Forum category!
Register to remove these ads. It's free! i have a 01 EB Expedition 4.6L. The driver side window just stopped ...

Reply
 
LinkBack Thread Tools Display Modes
Old 04-24-2010, 06:43 PM   #1 (permalink)
Registered User

 
Join Date: Apr 2010
Location: california
Posts: 10
Default power window problem


Register to remove these ads. It's free!
i have a 01 EB Expedition 4.6L. The driver side window just stopped working recently (in the up position!!). All the other windows work fine. I can hear a clicking noise in the fuse/relay compartment when the window controller is depressed. I checked the fuse that controls the windows but it is good. i have the haynes repair & owner manuals but they really don't get into the weeds!

does anyone know if there is another fuse for the windows?
is there a relay for the windows? if so which relay is it?

Any help would be greatly appreciated!!

THANKS!!
McRiver is offline   Reply With Quote
Old 04-27-2010, 12:38 AM   #2 (permalink)
Registered User

 
Join Date: Apr 2010
Location: california
Posts: 10
Default
Anyone have any suggestions, besides taking it to the dealer?!??!?!?!
McRiver is offline   Reply With Quote
Old 04-27-2010, 11:05 AM   #3 (permalink)
 
KWT2000's Avatar
Full Access Members

 
Join Date: Feb 2010
Location: NINE MILE FALLS
Age: 30
Posts: 1,955
Default
sounds to me like your window motor went out... you can remove the door panle and get to the motor and check the plug for power when you hit the switch. if theres power you need a new motor.... hope this helps
__________________
IM GOING TO PRESS "3" BECAUSE I WANT YOU TO LEARN ENGLISH!!!

1997 EXPY E.B., 6" LIFT, 35's, JET TUNER, REAR CAT DELETE, ELECTRIC FAN'S, XM RADIOSOLD 12/12/2011
Official Member Of The RED EDDIE BAUER Club
Official Member Of The LIFTED EXPY Club
CALL IN WITH EXPLOSIVE DIAREAH, THEY WON'T QUESTION IT!!!
KWT2000 is offline   Reply With Quote
Old 05-01-2010, 10:33 PM   #4 (permalink)
Registered User

 
Join Date: Apr 2010
Location: california
Posts: 10
Default
thanks i'll try that out to see if that works.
McRiver is offline   Reply With Quote
Old 05-03-2010, 08:51 PM   #5 (permalink)
Registered User

 
Join Date: Apr 2010
Location: california
Posts: 10
Default
ok I am 90% sure its not the switch and must be the motor. I tried using a multimeter but i am retarded when it comes to electrical stuff and not sure if i had it on the right setting.... if i replace the motor do i have to replace the regulator as well or can i just pop off the motor and put a new one on???
McRiver is offline   Reply With Quote
Old 05-03-2010, 08:56 PM   #6 (permalink)
Registered User

 
Join Date: Apr 2010
Location: california
Posts: 10
Default
oh and yes i have everything dismantled right now!!!!!! but i need this fixed by wednesday!!!! i called an auto electrical shop...talking about 250-300 to fix it!!!!!! but they only take people on wednesdays......everything i have been reading on the internet seems fairly easy, just unsure if i need the whole assembly or just the motor...... and if i have to drill holes in my door (to get the motor off only)

HELP ME!!!!!!
McRiver is offline   Reply With Quote
Old 05-03-2010, 09:29 PM   #7 (permalink)
 
KWT2000's Avatar
Full Access Members

 
Join Date: Feb 2010
Location: NINE MILE FALLS
Age: 30
Posts: 1,955
Default
you need to drill the rivots and remove the regulator and motor from the door then you can remove the motor from the regulator... theres no reason to replace the regulator if its in good shape hope this helps
__________________
IM GOING TO PRESS "3" BECAUSE I WANT YOU TO LEARN ENGLISH!!!

1997 EXPY E.B., 6" LIFT, 35's, JET TUNER, REAR CAT DELETE, ELECTRIC FAN'S, XM RADIOSOLD 12/12/2011
Official Member Of The RED EDDIE BAUER Club
Official Member Of The LIFTED EXPY Club
CALL IN WITH EXPLOSIVE DIAREAH, THEY WON'T QUESTION IT!!!
KWT2000 is offline   Reply With Quote
Old 05-03-2010, 09:52 PM   #8 (permalink)
Registered User

 
Join Date: Apr 2010
Location: california
Posts: 10
Default
is there anything that i need to do to the window before removing this????? is the regulater actually attached to the window or does it just sit on it?? thanks
McRiver is offline   Reply With Quote
Old 05-03-2010, 09:57 PM   #9 (permalink)
 
KWT2000's Avatar
Full Access Members

 
Join Date: Feb 2010
Location: NINE MILE FALLS
Age: 30
Posts: 1,955
Default
the glass is bolted to the regulator with 2 bolts take those out and wedge up so it dont fall when you get the regulator loose
__________________
IM GOING TO PRESS "3" BECAUSE I WANT YOU TO LEARN ENGLISH!!!

1997 EXPY E.B., 6" LIFT, 35's, JET TUNER, REAR CAT DELETE, ELECTRIC FAN'S, XM RADIOSOLD 12/12/2011
Official Member Of The RED EDDIE BAUER Club
Official Member Of The LIFTED EXPY Club
CALL IN WITH EXPLOSIVE DIAREAH, THEY WON'T QUESTION IT!!!
KWT2000 is offline   Reply With Quote
Reply

Bookmarks

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Vendors
1A Auto
5 Star Tuning
Stubby Antenna
Fukken Wax
RockAuto
The Grafx Shop
Sponsors

Other Sponsors

GM Truck Forum
Ford Raptor Forum
Chevy Tahoe Forum
Chevy Cobalt Forum
Chevy Camaro Forum
FJ Cruiser Forum 		Ford Truck Forum
88-98 GM Truck Forum
73-87 Gm Truck Forum
Dodge Ram Forum
Chevy Equinox Forum
Chevy Cruze Forum 		Jeep Liberty Forum
Jeep Forum
Dodge Ram SRT10 Forum
Chrysler 200 Forum
Scion xD Forum
Scion xB Forum 		Dodge Challenger Forum
Scion FR-S Forum
Softball Forum
SRT Forum
Nissan Titan Forum
Buick Enclave Forum
Cadillac Forum
Cadillac XTS Forum