Recent content by Ex0r

  1. E

    wheel hub replacement, stripped bolt head

    I don't have any idea how you got a grinder in there, let alone a sawzall. There isn't any room for a socket, let alone a huge grinder. Did you just cut vertically through the old hub and remove the bolt, or what?
  2. E

    wheel hub replacement, stripped bolt head

    So what the hell am I supposed to do now? Because Ford are idiots and design stuff to operate like shit, one of the damn bolts that holds the wheel hub assembly in place in the front is completely stripped (the head) A screw extractor isn't going to work because the bolt is seized into the hole...
  3. E

    Code p0140 and p0147

    I think I have the right codes, I am getting them on my 97 expedition, 5.4l. 02 sensors bank 1 and bank 2 running lean. It also says if both codes are triggered, suspect MAF. I replaced the maf with a used replacement that was known to work prior. Still throws the CEL. I have no performance...
  4. E

    sticking tailgate handle

    Is there somebody here who has experienced the problem with the rear tailgate handle being extremely hard to turn? I can turn it both ways to open either door or glass, but it's very hard to turn, and sometimes it requires ALOT of force either way. Also, I am not sure if it's supposed to return...
  5. E

    1997 ford expedition electrical questions

    I am going to a u pull lot this weekend to get some parts for my truck, and I have a couple of questions on a couple of parts i am unsure about. Where is the wiring harness for the running board lights? Neither side works, and the fuse is good (Drivers side wires were messed up so I patched...
  6. E

    p1041 and

    My truck recently got both p1071 and p1074 codes. Diagnostics said if both are set suspect MAF but here's the thing. A few months ago only one o2 sensor made cell. What's the likelihood that its actually the maf and not both o2 sensors? I'm not just gonna replace all three as that's 200$ thrown...
  7. E

    What to look for when buying a gen 1 expy

    I've got a 97 EXPY with 270,000 miles on it and i'm getting about 13.8 mpg according to my over head display.
  8. E

    97 EB Exhaust Manifold Removal

    I have a 1997 eddie bauer edition with the 5.4 litre v8 in it. The passenger side exhaust manifold needs to be removed so that the studs can be replaced in it, but the bolts holding it in are all rounded off (From the previous owner). What is the easiest way to get to them to cut them off...
  9. E

    Fuel Economy

    Okay, some questions. I have a 1997 expedition, eddie bauer edition. It has a 5.4 v8 in it. The odometer thing says it's getting anywhere from 11-12 mpg, does this seem right? It seems kind of low, even for that big of a car. A full size hummer nearly gets better than that. Also, over the...
  10. E

    Installing amp and subs

    Okay, I found what I need to do. I can get one of those schoche in-line convertors, like pictured below: http://a248.e.akamai.net/pix.crutchfield.com/products/2008/142/p142SLC4-F.jpeg and with that, I can wire into the rear speakers at the head unit, into the 'input' on one side...
  11. E

    Installing amp and subs

    hmm that one looks like it has to be spliced into the original wiring harness, too. I was hoping i could use a solution that didnt require messing up the original wiring harness. Do you know anything about the 1997 ford expedition? How does the amp hook up to the radio? I had read somewhere...
  12. E

    Installing amp and subs

    Is that something that will work on the stock head unit or only for aftermarket? What I am wanting to do, is replace the original amp and subwoofer with the aftermarket ones in a box in the back of the truck. I don't think the stock woofer would sound nice next to a couple JL subs. Do you...
  13. E

    Installing amp and subs

    I have a 97 expedition, eddie bauer edition. It has the mach audio system and 6 disc changed. can I install an aftermarket amp and subwoofer system into the car using the stock stereo, or does it require some special hardware? I want to install an amp and a couple of 12 or 15" woofers in my...
  14. E

    evap can purge solenoid wiring

    okay, so I have been looking for answers, and it appears there is both a purge solenoid, and vent solenoid on expeditions? The purge solenoid is on the firewall, which is what I replaced, but others are saying that there is a vent solenoid on the frame rail? Anyone have a picture of what it...
  15. E

    running board wiring

    So my running board lights aren't working, so last weekend I climbed under there, and found out that the wiring coming from the main harness to the running boards on the drivers side was completely broken. Upon further investigation, I found out that the wiring was completely corroded inside of...
See more

Latest posts

Members online

Total: 1,528 (members: 26, guests: 1,502)

Forum statistics

Threads
53,687
Posts
502,992
Members
47,325
Latest member
bob029rowe

Share this page

Top