Search results

  1. J

    Busted Compressor

    I know what you mean! It really wasn't that bad but I'm a shade tree mechanic and been fixing it for years, well since it was like 5 years old... Can you say rust? LOL I think I got it done for like 300.00. Have fun in Fl and try not to cook in the truck!
  2. J

    chasing a p0171 P0174 trouble code

    Mine ended up being nothing malfunctioning, just a clogged port in the throttle body. Yes I replaced a bunch of stuff first! Then I talked to a ford mechanic.....Youtube it. They clog with carbon. Mine was so bad I couldn't find it until I scrubbed the body and found a black spot about the size...
  3. J

    Busted Compressor

    My 97 comp clutch rusted out, like everything else. Comp was a PITA to get to, but doable. Replaced the rear AC valve (If you have rear A/C, the inline filters, and O rings. They all came with the kit. My buddy is a mechanic for fleet vehicles for the government. All they do is flush out all the...
  4. J

    Abs Sensor

    I know this is old, but what I just found out might help someone with an ABS light. My son was pulling a trailer with the 97 4X4 Expedition rust bucket and had to stop quickly a few times. The front brakes started smoking and shortly after, the ABS light came on and the brake peddle would...
  5. J

    Brake Rotors

    Anti-seize for new brake rotors Also, the Ford Mechanics at the stealerships reassemble the rotors with a coating of anti-seize for the next time! Just saying………….
  6. J

    Door Ajar

    Dome light stays on I had the same problem and traced it to the rear hatch window sensor. I used electronic contact lubricant cleaner from radio shack and then silicone spray on all the sensors. Open and closed the window about 10 times and it worked. Been about 6 months, so far so good.
  7. J

    EGR Flow Insufficient

    Clogged Throttle Body It’s a common problem. My 97 Expedition with about 115K at the time was popping off codes and I got all the info to replace everything. I read about the Throttle body passages being clogged so I removed it and sure enough after I cleaned it, I saw where passages were...
  8. J

    Service Codes Rough Running/Idling

    PCV Hose I had the same problem. Ford didn't have the 40.00 part so I removed the part and most of it is hard plastic pipe that looked brand new with insulation around it, so I just replaced the rubber ends that were dry rotted and leaking with fuel line hose for about 3 bucks from the auto store!
  9. J

    Brake Rotors

    I wish I would have seen that youtube before I hammered all day, then gave up and replaced the whole Hub!
  10. J

    Should i tackle exhaust manifold

    R&R the right Exhaust Manifold My legal disclaimer: I don’t not recommend anyone doing this, this is just what I did….;-) A nut splitter won't work, you cant get it in the tight space. OK, this job is a bitch on an older vehicle; I just did it to the passenger side (97 Expedition 120K)...

Latest posts

Members online

Total: 565 (members: 5, guests: 560)

Forum statistics

Threads
53,726
Posts
503,279
Members
47,384
Latest member
the_plugger

Share this page

Top