In case anyone comes across this with a similar issue I was able to use forscan to disable side sensors, this worked perfectly! There’s a setting for front, rear and side
In case anyone comes across this with a similar issue I was able to use forscan to disable side sensors, this worked perfectly! There’s a setting for front, rear and side!
I purchased two of the ranch hand sensor covers but they’re not working for me. Immediately when I start the vehicle I get alert that the sensors are blocked and it disables the system. Is there something I need to do to reset the system with the covers in place?
I understand what you’re saying that even though we have an upgraded wheel size of 22” that the overall outer circumference of the tire should be the same or close to the factory 18”.. we don’t have offsets or spaces so the wheels don’t stick out. When we’re pulling into our garage or a parking...
I have aftermarket 22” wheels installed on our 2019 expedition which I believe at 18” from the factory. The two front bumper corner parking sensors “see” the tires when going in and out of our garage or parking spacing. Is there a way to calibrate these sensors to solve this problem? I tried...
I purchased the ranch hand sensors but they don’t work. Soon as I start the vehicle I get notified that the sensors are blocked and it deactivates them
I’ve been trying to figure out why my fog lights aren’t working on my 2019 Ford Expedition limited edition. As stated in a different post I turned on Bambi mode when I first got into forscan and that’s what led me to realize that my fog lights don’t work at all. It was suggested that I go back...
Thanks for that suggestion but I’d like an option that would only disable the two corners sensors on the left and right of the front bumper so that I’m not having to turn anything off and back on..
Our 2019 limited expedition has aftermarket 22” wheels installed and because of this when we are for instance pulling into our garage the two front corners bumper sensors “see” the tire and sound off. This is really annoying so I’m wondering if anyone has any ideas how to remedy this. Thanks in...
That was my first thought too but couldn’t find anything in the owners manual in either fuse box.. My understanding is that there isn’t a fuse because it’s controlled by the bcm..
2019 Ford Expedition Limited
Factory led fog lights
Ive recently noticed that neither one of my fog light are working. Green indicator on dash illuminates but neither light comes on. I checked to see if the module and get 12v and they’re not getting any power.
What should I check? I have...
I bought a 6’ male mini to male mini off of Amazon but I think a 3’ may have worked. I had to trim the rubber around the connector to make it fit into both the module and the back of the apim. Also I used some silicone type glue around each end to ensure it won’t work its way out. I was able to...
Update on this problem for anyone else experiencing it… it turns out that my apim was replaced at some point with a my20 unit(originally it would not have had a my20 apim). I don’t know if that in itself was what caused the issue with tone settings being retained or if someone had something off...
My air vent manual diverter is broken and I need a replacement. I see some complete vent modules (for lack of a better word) on eBay but I don’t really need a complete deal.. just the little piece that move the cog looking thing. Can that piece be purchased somewhere? Picture below is a normal...
2019 Ford Expedition Limited Edition
So I may have messed up with this button, or is it even a button that’s supposed to be pressed? This expedition is new to us so I was trying out all the buttons. Similar to the power button inside the volume knob I assumed that TUNE inside the other knob...
So I want to post an update for any one else having this issues.. I replaced the cable that goes from the back of the head unit down to the usb module and it solved my problem! No need to even replace the module because my factory one is working great.
2019 Ford Expedition Limited Edition
SYNC 3, Software Version: 3.4 Build 20136_PRODUCT
I tried to update using wifi but it says I’m up to date.. is this fully updated?
The two front usb ports do not work.. they do not charge a phone using brand new oem Apple lightning cable and obviously...
2019 Expedition Limited Edition with B&O
My tone settings will not put! I’ve seen other threads mentioning something similar when turning the vehicle off but my issue happens immediately. For instance if I adjust bass up two notches it immediately returns to the middle in front of my eyes...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.