Brand new fan clutch, recently new condenser, recently new expansion valveExpansion valve getting blocked? Condensor coil dirty? Fan blade not turning?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Brand new fan clutch, recently new condenser, recently new expansion valveExpansion valve getting blocked? Condensor coil dirty? Fan blade not turning?
**UPDATE** I had to do something. ... Low side pressure is 70, high side is 390 steady. Doesn't change unless I add RPM. At rest the system equalizes at 150. Compressor might have 2000 miles on it (Denso.)
Is there anything you can tell me with this info? I'm really tryin to get all the information together, but I need your help and experience. Please.
With an AC vacuum - it pulls down past 0 on the gauges and I let it run for about 45 minutes then let it sit for a couple hours and make sure the needle hasn't moved.None condensables in the system, how are you pulling a vacuum? In the AC industry we pull a vacuum down to 500 microns, are you using a micron gauge?