Omodan
Member
BLUF: Looking for ideas as to what may be the root cause of all the errors in hopes that i can get it running well enough to get home.
My family and I drove ~400 miles to Tennessee to visit family in our new 22 Timberline. After a couple days there, upon starting the truck, the AC shut off and numerous error messages began popping up on the instrumentation panel. The errors which presented in the FordPass Application are ‘Powertrain Malfunction / Reduced Power’, ‘Pre-Collision Assist Not Available’, ‘Park Aid Malfunction’, and ‘Blind Spot Detection with Cross Traffic’.
I put the vehicle in park and attempted to turn it off to essentially ‘reboot’ the truck. The dash and center screen all powered off but the engine kept running. After trying several items to try and get the engine to shut off, i ultimately disconnected the battery and then held down the push/start button until it eventually shut off. Afterwards, the vehicle will not start at all. It will turn on all of the screens but the engine will not crank.
It has now been towed to a local Ford Dealer in which i have been told that they will be unable to look at it for a few days. So i am essentially stuck in Tennessee and was supposed to return home/work today.
I doubt all of the components all just failed at once and am hopeful it could be something like a loose connector or bad battery. Unfortunately i wont know for a couple days and am not sure what to expect at this point. I attached a full list of all the errors that the dealer gave me when the vehicle was dropped off by the towing company.
My family and I drove ~400 miles to Tennessee to visit family in our new 22 Timberline. After a couple days there, upon starting the truck, the AC shut off and numerous error messages began popping up on the instrumentation panel. The errors which presented in the FordPass Application are ‘Powertrain Malfunction / Reduced Power’, ‘Pre-Collision Assist Not Available’, ‘Park Aid Malfunction’, and ‘Blind Spot Detection with Cross Traffic’.
I put the vehicle in park and attempted to turn it off to essentially ‘reboot’ the truck. The dash and center screen all powered off but the engine kept running. After trying several items to try and get the engine to shut off, i ultimately disconnected the battery and then held down the push/start button until it eventually shut off. Afterwards, the vehicle will not start at all. It will turn on all of the screens but the engine will not crank.
It has now been towed to a local Ford Dealer in which i have been told that they will be unable to look at it for a few days. So i am essentially stuck in Tennessee and was supposed to return home/work today.
I doubt all of the components all just failed at once and am hopeful it could be something like a loose connector or bad battery. Unfortunately i wont know for a couple days and am not sure what to expect at this point. I attached a full list of all the errors that the dealer gave me when the vehicle was dropped off by the towing company.