2010ELExpy4x4
Well-Known Member
Limited probably has dual zone I believe module in different location than standard, which is at bottom right side of blower box
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I have the 2017 Expedition with tow package and 4x4. The blower some times will not come on. I can stop, go to the passenger side and wiggle the wires under the kick panel and it will start going again. So there is a bad connection there. I have an IR camera and I could see the two large wires going into a white module on the side of the blower case were hot as well as one of the many connectors under the dash, a couple of larger wires get warm from the amperage of this blower, and I think the real problem is connector contacts that get hot, melt or reflow the plastic in the connector, and cause an open circuit. Maybe since I tug on the wires in that area I clean the contacts on the blower motor connector. I have not done a recall for hot blower motor yet. A connector with high amperage can get hot enough to ignite the plastic in the connector if its got bad contact. I need to know what exactly they are replacing in that recall.My wife’s 2018 expedition max limited has started to have this problem with the fan being on high and not blowing at all or very little. The blower is still working but no air out vents. I bought a new blower motor resistor but can’t find it for the life of me. I’m really needing someone to point in the right direction of this car. We have had nothing but problems for this past year. We love the car for the size for the kids but it’s starting to become a pain.
There is a recall on the blower motor, which Ford will replace at no charge. there are also issues with the controller /resister, and possibly the harness. If it turns out you need either of the other items and do not have an extended warranty, you will be charged for these.I have the 2017 Expedition with tow package and 4x4. The blower some times will not come on. I can stop, go to the passenger side and wiggle the wires under the kick panel and it will start going again. So there is a bad connection there. I have an IR camera and I could see the two large wires going into a white module on the side of the blower case were hot as well as one of the many connectors under the dash, a couple of larger wires get warm from the amperage of this blower, and I think the real problem is connector contacts that get hot, melt or reflow the plastic in the connector, and cause an open circuit. Maybe since I tug on the wires in that area I clean the contacts on the blower motor connector. I have not done a recall for hot blower motor yet. A connector with high amperage can get hot enough to ignite the plastic in the connector if its got bad contact. I need to know what exactly they are replacing in that recall.
3rd gen expeditions do not have cabin air filters.is there a cabin air filter in a 2013?
You may have to expand the photo to see where its location is. Sorry about the clarity of the photo.I would but I don’t even know which one it is. Didn’t know if it was behind anything or had to take other pieces off to get to it. I guess I’m looking more for the location of that part. I didn’t take picture of it had it tore down the other day. Was more frustrated it wasn’t right in front of the blower motor.