Show your Lifted 3rd Gens

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Ben1953

New Member
Joined
Feb 16, 2021
Posts
2
Reaction score
2
Location
Georgia
Th "Beast"
 

Attachments

  • 20240410_084531.jpg
    20240410_084531.jpg
    224.6 KB · Views: 22
  • 20240410_084811.jpg
    20240410_084811.jpg
    197 KB · Views: 19
  • 20240410_084739.jpg
    20240410_084739.jpg
    164 KB · Views: 21
  • 20240410_084704.jpg
    20240410_084704.jpg
    155.1 KB · Views: 21

ptguy0618

Member
Joined
Jun 3, 2022
Posts
12
Reaction score
0
Location
Tennessee
Thanks! Almost just how I want it, still a few things left to do before I’m 100% satisfied

@JExpedition07 i did not know him. I enjoy parking next to similar trucks like these that park at the back of parking lots. Parked in front of a suburban one time and the owner was walking out in front of me. He stated “man that’s a nice truck” to his wife who then asked “where did we park?” I politely pointed out they were behind my truck and they both laughed.
How have you enjoyed the 5 star tune you have. Sorry i know i am replying to a super old comment. Do you still have the expy?
 

ooggrraall

New Member
Joined
Dec 31, 2023
Posts
1
Reaction score
0
Location
Poland
Hi,
I recently became a happy owner of a 2014 Ford Expedition. Currently, I'm battling rust, replacing the rockers, and preserving the frame. I would like to lift it. I have already bought a ready lift kit for it. Now, the main question is about tires and rims. Will 35/12.5 R18 tires fit on 18x9 rims? And the second question is, will the tires rub? What offset should I choose for these rims?

Thanks for any help
 

Dustin Gebhardt

Full Access Members
Joined
May 10, 2018
Posts
131
Reaction score
58
Location
Tulsa, OK
What’s the lift kit height?

My ‘07 has a 3/2 lift and I run 35/12.5R17 BFG KO2 tires. I had to trim the front bumper just a little as well as the area near the running boards.
 

n8dawg

Member
Joined
Jun 28, 2024
Posts
6
Reaction score
3
Location
North Florida
2011 El Limited
3”/2.5” eBay spacer lift
Detroit Axle front and rear shock replacements
20x10 -18 offset Moto Metal M0802
35x12.50x20 Kenda Klever R/T KR601
Repositioned rear brake lines so they weren’t tight at full extension
Trimmed about 2” off power steps on the front sides
Trimmed the plastic fender on both sides of wheel
Trimmed valance up front

Still rubs a tad when reversing, and going into driveways at a faster speed

MPH was off about 7mphs. At 45mph on the dash I was going 52mph.

Before:
IMG_1374.jpeg

After:
IMG_2200.jpeg
 

Attachments

  • IMG_2201.jpeg
    IMG_2201.jpeg
    198 KB · Views: 9
  • IMG_2202.jpeg
    IMG_2202.jpeg
    217.5 KB · Views: 9
  • IMG_2198.jpeg
    IMG_2198.jpeg
    198.4 KB · Views: 9

Latest posts

Members online

Forum statistics

Threads
54,517
Posts
509,001
Members
48,788
Latest member
Stoney
Top