Fuse to tap dashcam?
- Thread starter Jeka
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
How did you run the rear camera down the side, and also at the gate?
GixxerJasen
Full Access Members
I installed the Viofo 139 Pro today. Had a brain fart and ordered the 2ch with the interior camera, so I'm waiting on the rear camera to finish the installation.
Side note, the hardwire kit has a ground, ACC and constant power. I used the add a fuse taps using the Steering Wheel Heat for ACC (heat still works) and the powered foot pedals for the constant power. That enables parking mode and the hardwire kit has a switch to choose how low to let the battery go before the hardwire stops sending power to the Viofo.
Had a test run and everything is still working well.
Side note, the hardwire kit has a ground, ACC and constant power. I used the add a fuse taps using the Steering Wheel Heat for ACC (heat still works) and the powered foot pedals for the constant power. That enables parking mode and the hardwire kit has a switch to choose how low to let the battery go before the hardwire stops sending power to the Viofo.
Had a test run and everything is still working well.
