hit a deer -knocked out 360 video camera/sensor

[andyak]

The front drivers side bumper camera/sensor was knocked off the inside of the bumper and looks like any plastic mounting was broken.

Any advice on how to remount this little bugger inside the panel? epoxy?

Thanks,
Andy

 

[99WhiteC5Coupe]

The front drivers side bumper camera/sensor was knocked off the inside of the bumper and looks like any plastic mounting was broken.

Any advice on how to remount this little bugger inside the panel? epoxy?

Thanks,
Andy

No idea how to fix - but your vehicle comprehensive insurance coverage should cover the damage repair (minus any deductible) - without penalty to your policy.

 

[andyak]

key point - minus the deductible.... $7 for epoxy or $250 and dealer wait. Just thought maybe someone on here had to remount one at some point.

 

[andyak]

Done. Used Gorilla glue 2 part epoxy. Removed wheel well plastic pop in retainer and 2 screws to gain access behind front fender from wheel well. cleaned all mating parts with acetone and put epoxy on both the camera mount and the fender. Put it together at the correct angle and held it until cured. I then mixed another small batch and put more over the mating surfaces to make sure it was future proof. easy peasy.